IPV6 Router configurations

First enable the protocol and assign IPv6 addresses to your interfaces

Router(config)# ipv6 unicast-routing
Router(config)# interface type [slot_#/]port_#
Router(config-if)# ipv6 address ipv6_address_prefix/prefix_length [eui-64]

just add an address to the interface use
interface configuration command ipv6 address <ipv6prefix>/ <prefix-length > [eui-64

Router(config)# interface fastethernet0/0
Router(config-if)# ipv6 address 2001:1cc1:dddd:2::/64 eui-64
Router(config-if)# end
Router# show ipv6 interface fastethernet0/0
FastEthernet0/0 is administratively down, line protocol is down
IPv6 is enabled, link-local address is FE80::207:EFF:FE46:4070
[TEN]
No Virtual link-local address(es):
Global unicast address(es):
2001:1CC1:DDDD:2:207:EFF:FE46:4070, subnet is
2001:1CC1:DDDD:2::/64 [EUI/TEN]
Joined group address(es):
FF02::1
FF02::2

To set up a static DNS resolution table on the router
Router(config)# ipv6 host hostname [port_#] ipv6_address1 [ipv6_address2…]
Router(config)# ip name-server DNS_server_IPv6_address

Enabling RIP
Router(config)# ipv6 router rip tag

ipv6 rip tag enable command
Router(config)# interface type [slot_#/]port_#
Router(config-if)# ipv6 rip tag enable

show ipv6 rip command
Router# show ipv6 rip
RIP process “RIPPROC1”, port 521, multicast-group FF02::9,
pid 187
Administrative distance is 120. Maximum paths is 16
Updates every 30 seconds, expire after 180
Holddown lasts 0 seconds, garbage collect after 120
Split horizon is on; poison reverse is off
Default routes are not generated
Periodic updates 2, trigger updates 0
Interfaces:
FastEthernet0/0
Redistribution:
None

EIGRPv6
Router1(config)#ipv6 router eigrp 12
Router1(config-rtr)#no shutdown
Router1(config-if)#ipv6 eigrp 12

OSPFv3
Router1(config)#ipv6 router osfp 10
Router1(config-rtr)#router-id 1.1.1.1
Router1(config-if)#ipv6 ospf 10 area 0.0.0.0

What is IPV6
https://teckadmin.wordpress.com/2014/11/23/what-is-ipv6-address/

How to configure in windows
https://teckadmin.wordpress.com/2014/11/23/how-to-configure-ipv6-in-windows/

How to configure in Linux
https://teckadmin.wordpress.com/2014/11/23/ipv6-static-address-configuration-for-linux/

Advertisements

Posted on November 23, 2014, in Networking. Bookmark the permalink. Leave a comment.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: